Anycubic · RESIN
Anycubic Water-Wash Resin 2.0
110 ₾
110 ₾/kg
Quantity pricing
1 pc
110 ₾
4+ pcs
104,50 ₾
10+ pcs
99 ₾
Only 2 left
110 ₾
Black
Pickup in Batumi - today
Batumi courier - tomorrow
Across Georgia - 1-3 days
Description
Water-Wash Resin 2.0 rinses off with plain water. That changes the whole workflow: no litres of isopropyl alcohol and no solvent smell in the flat.
What you get:
- washing with water instead of alcohol;
- low viscosity, so the vat is easier to fill and clean;
- 16-22% elongation at break, so models chip less;
- works with 4K/8K/12K LCD and DLP printers at 405 nm.
The manufacturer's figures are in the specification table.
Recommended use
Miniatures and figures, prototypes, jewellery masters, anything where fine detail is the point.
Limitations
Waste water carries resin - never pour it down the drain, cure it under UV first. Post-curing is required. Work in gloves with ventilation.
Technical specifications
Printing properties
| Wavelength | 365-405 nm |
|---|---|
| Normal exposure | 2-2.5 s |
| Bottom exposure | 25-40 s |
Physical properties
| Viscosity (25 °C) | 190-230 mPa·s |
|---|---|
| Density | 1.07-1.09 g/cm³ |
| Volume shrinkage | 2.2-5.5 % |
Mechanical properties
| Tensile strength | 38-43 MPa |
|---|---|
| Elongation at break | 16-22 % |
| Hardness | 82-85 HD |
No reviews for this product yet